Operating instructions

G3 Series Safety
Safety signs
3-11
000011,06,02-2009, jmu
3
3.11 Safety signs
3.11.1 Responsibility of the operator
Warning !
Risk of injury due to a lack of safety signs
Risks and sources of danger cannot be localised due to the lack of safety signs.
• Replace missing or illegible safety signs as per Fig. 3-1
The operator is responsible for replacing missing/illegible safety signs on the
machine. The appropriate safety signs can be requested from your service partner.
3.11.2 Position of the safety signs
Fig. 3-5 Safety signs
Important safety signs on the machine must be followed. Otherwise, this could result
in serious injuries or death. Special module or tool specific signs can be found in the
relevant operating manual.
1 Danger of hand injuries
2 Danger of electrical safety hazard
3 Laser beam warning
4 Warning of the danger of cuts
5 Wear eye protection
6 Wear protective gloves