Operating instructions

Safety G3 Series
Safety and monitoring devices
3-16
000011,06,02-2009, jmu
3
3.12.3 Emergency stop switch
– Emergency stop switches are part of a protective circuit
– They allow the machine to be turned off quickly in hazardous situations
Two emergency stop switches can optionally be fitted on the edges of the machine.
The mains power supply to the whole machine is switched off as soon as the
emergency stop switch is pressed. The operating unit remains switched on.
Attention !
Pressing the emergency stop switch can damage the cutter.
Do not press the emergency stop switch to switch off the machine in routine
operation.
Important !
To unlock an activated emergency stop switch after regaining operational safety, turn
the switch anticlockwise (see chapter "Controls and operation").
3.12.4 Safety cut-off feature
The following safety measures are introduced when an overload occurs or an axle
drive (T, X, Y, Z) is blocked:
– An emergency stop is carried out
– The cutter switches to the operating status STOPPED
– An error message and an alert buzzer indicate the safety cut-off