Operating instructions

Safety G3 Series
Mechanical hazards
3-18
000011,06,02-2009, jmu
3
3.14 Mechanical hazards
3.14.1 Gathering, retraction
Hazards caused by the bar, modules or the tool system during gathering and
retraction
Possible consequences:
• Cuts, bruising and crushing of fingers and hands
• Bruising of head and arms
• Tearing out of hair
• Damage to clothing
• Damage to the machine
Precautions during the initialisation and the operation in the ONLINE operating
status:
• Do not touch tool head and bar
• Do not enter the working/active area
• Do not touch table surface and material to be processed
• Do not lay your hands on side covers
• Do not lean over the working surface
• Avoid leaving long hair loose and wearing loose clothes and ties
These precautions specifically apply if the cutter can be switched into ONLINE
operating status by the CAD/CAM system.
3.14.2 Gathering, impacts of foreign objects
Foreign objects on the table are grasped and pushed away by the bar and the tool
head.
Possible consequences:
• Facial injuries and other injuries due to objects being pushed away
• Damage to the machine
Precautions during the initialisation and the operation in the ONLINE/OFFLINE
operating status:
• Do not place materials, tools or other objects on the table or side covers
• Before operation, check whether there are any objects on the table or the side
covers