Operating instructions

Safety G3 Series
Risk of fire and explosion
3-24
000011,06,02-2009, jmu
3
3.21 Risk of fire and explosion
Warning !
There is a risk of fire when routing and cutting inflammable materials
Terminate the routing/cutting and leave the tool to cool in the case of
• Formation of smoke
• Discolourations on the router/knife which point to increased heat development
Warning !
Risk of dust explosions
Flying sparks or electrostatic charges result in the risk that there will be dust
explosions during the extraction of different materials.
• Obtain information about the risk of explosion when processing the type of ma-
terial that you are using.
• If necessary, adjust the extraction to the required regulations.
Fire classes
Refer to the following table to find out which type of fire extinguisher is used for each
fire class:
A Solid materials, mainly organic in nature; e.g. wood, paper, textiles, etc.
B Liquid and liquefiable substances; e.g. petrol, oils, greases, paints, etc.
C Combustible gases: methane, propane, etc.