Operating instructions

Controls and operation G3 Series
Menu navigation
4-14
000010,06,02-2009, jmu
4
4.4 Menu navigation
4.4.1 Menus and functions
Navigation
The cutter has a large number of functions. The current menu number and the
current menu are displayed in the header.
Fig. 4-11 Current menu number, menu
Graphic layout
Navigation in the menu
⇨ Use the navigation keys to scroll through the menu and use to
select a submenu/a function (e.g. Tools).
⇨ To return to the previous menu level press the navigation key . Press
ESC to
return back to the main menu.
Direct selection of menus
Each menu and each function is allocated a unique menu number. It is possible to
change between menus by entering the menu number. Two-figure menu numbers
(10, 11 etc.) are displayed in lower positions.
Commands/functions
Commands are carried out immediately after the entry.
⇨ Use the navigation keys to mark the required command and select
using .
⇨ The command can be triggered directly via the menu number. In order to do this,
enter the menu number on the control panel
An exception to this rule is made for safety-relevant commands (e.g. automatic
moving). These can be confirmed using OK or cancelled using ESC.
Symbol Description
Menu
Blocked menu (user level)
Value/entry/command
Display of a value