Operating instructions

Controls and operation G3 Series

Operation

4-20

000010,06,02-2009, jmu

4.6 Operation

4.6.1 Daily checks prior to start-up

Attention !

There is a risk of injury if the machine is defective.

Faults on the machine may be the cause of malfunctions and accidents - never start

up a defective machine.

• Report all defects and faults to your supervisor and arrange for them to be rec-

tified immediately by qualified personnel.

Inspection

Ensure that all maintenance and service tasks are performed in accordance with the

maintenance schedule.

Before starting up the machine each day, perform a walk-round of the machine and

check the following:

• Check the machine for visible damage

• Remove local dirt caused by processing materials and dust

• Remove objects from the processing table/the side supports

• Check whether all maintenance and service covers are installed correctly