Operating instructions

G3 Series Controls and operation
Operation
4-25
000010,06,02-2009, jmu
4
4.6.3.2 STOPPED
Important !
The operating status STOPPED protects the operator from the machine being set
into motion using remote controls.
In this operating status, commands (e.g. HPGL) are received but they are not
processed. Even commands from the operating software (e.g. to change to the
ONLINE operating mode) are ignored.
⇨ must be pressed in order to activate the operating status STOPPED. The
displays shows the following message:
⇨ Use to switch from the operating status STOPPED to ONLINE or use
SHIFT to switch to the operating status OFFLINE in order to reactivate the
remote control.
A red illuminated LED on the ONLINE key indicates that the operating status
STOPPED is active.