Operating instructions

G3 Series Controls and operation
Operation
4-33
000010,06,02-2009, jmu
4
Inserting/replacing the module (e.g. UM)
Fig. 4-19 Inserting the module
⇨Select Change module 1-5-1. The module carriage moves to the control panel
⇨ Position the module on the mounting ledge as shown in Fig. 4-19, step A
⇨ Tilt the module backwards onto the module carriage
⇨ Lower the module until it stops
⇨ Use the 4 mm Allen key to fix the module in place
✓ The module is now mounted and is located by the software
Problem solution
The module cannot be lowered.
⇨ Loosen the module locking mechanism before insertion