Operating instructions

Controls and operation G3 Series

Operation

4-36

000010,06,02-2009, jmu

4.6.7.1 Connection - electrical tools (EOT, DRT, etc.)

Fig. 4-21 Connection - electrical tools

Procedure

⇨ The tool is attached and allocated to the module

⇨ Insert the tool into the connection provided

⇨Use

Tool connector

1-1-1-3-1-1 to allocate the tool connection to the

corresponding port

✓ The tool is ready for use

1 Connection 1 = port 1

2 Connection 2 = port 2

3 Connection 3 = port 3