Installation Guide

Section 2.3: Changing Other NT9010 Functions
51
Information regarding the programming of the Command Keys must come from
the central station to which you will be reporting.
Once you have talked to the central station, program the telephone keys to operate
as they require.
Talk/Listen-in on Phone Lines 1/3 . . . . . . . . . . . . . . . . . . . .Section [381], option [5]
Talk/Listen-in on Phone Line 2 . . . . . . . . . . . . . . . . . . . . . .Section [381], option [6]
Port Assignments. . . . . . . . . . . . . . . . . . . . . . . . . .Sections [802]-[10] to [802]-[13]
Enable Talk/Listen-in on Zones 1-32 . . . . . . . . . . . .Sections [802]-[50] to [802]-[53]
Talk/Listen-in Event Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [802]-[54]
Audio Duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [802]-[55]
Telephone Key Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [802]-[40]
Telephone Mode Key Programming . . . . . . . . . . . . . . . . . . . . . . Section [802]-[41]
2.3.14 Downloading
Downloading allows programming of the entire system via a computer, modem
and telephone line. All functions and features, changes and status, such as trouble
conditions and open zones can be viewed or programmed by downloading.
NOTE:
When power is applied to the system, a 6 hour downloading win-
dow will be enabled. This will allow you to perform downloading without
having to do any keypad programming.
When an event occurs that the system is programmed to communicate to the cen-
tral station, the system will disconnect from the downloading computer and report
the event. This will happen for all events except test transmissions.
If you enable the Standard Communications Priority option, the NT9010 system
will only disconnect DLS and Talk/Listen sessions for alarm and Priority (FAP) events
that are programmed to communicate. If the UL Communications Priority option
is enabled, the NT9010 system will disconnect DLS and Talk/Listen sessions on any
event programmed to communicate, with the exception of Test Transmissions and
System Tests.
If the Answering Machine/Double Call option is enabled (or during the first 6
hours after power up) the system will answer incoming calls for downloading pro-
vided the following conditions occur:
1. The system hears one or two rings, then misses a ring.
2. The system starts the Answering Machine Double Call Timer.
3. If the system hears another ring before the timer expires, it will answer on the
first ring of the second call.
4. The system will immediately go on line and begin the download process unless
the Call Back option is enabled.
5. If Call Back is enabled, the system and computer will both hang up. The system
will then call the Download Computer Telephone Number and wait for the
computer to answer. Once the computer answers, downloading will begin.
If the User Enabled DLS Window option is ON, the user can activate the down-
loading feature for a set period of time by entering [✱][6][Master Code][5].