User's Guide
Table Of Contents
- Quick Reference Guide
- The following chart lists the basic functions of your system, and the keys to press for each func...
- Turn on system (Away): [access code], leave through entry/exit door 9 OR press Away (if enabled)
- Turn on system (Stay): [access code], do not leave premises 10 OR press Stay (if enabled)
- Turn off system: [access code] 8
- Turn on system (No Entry Time): [access code] 11
- Turn on system (Quick, if enabled): (from Ready state) 10
- Turn on rest of system (if Stay armed): OR press Interior (if enabled) 10
- Exit premises when system on: OR press Exit (if enabled) 12
- Turn off zones (Bypass): [two-digit zone number(s)], to exit 15
- Test system [master code] 17
- Send Fire message: (press & hold for 2 seconds, if enabled) 14
- Send Auxiliary message: (press & hold for 2 seconds, if enabled) 14
- Send Panic message: (press & hold for 2 seconds, if enabled) 14
- Silence fire alarm: [access code] 13
- Silence intrusion alarm: [access code] 14
- Turn door chime on/off: to toggle on or off 20 OR press Chime (if enabled)
- Check alarm memory: 14
- Check troubles 16
- Set time and date: [master code] 20
- Table of Contents
Turning Your System On (Arming) and Off (Disarming)
9
Tur ning On
Your System
When
Everyone is
Away (Away
Mode)
When you turn on your system using the Away method, both interior zones (e.g.,
motion detectors) and perimeter zones (e.g., door and window contacts) will be
active and will cause an alarm if they are opened.
1. Check that your system is ready (green Ready light is ON).
2. Enter your [access code]. As you enter each digit, the keypad sounder beeps.
If you entered the access code incorrectly, the keypad sounder buzzes steadily
for two seconds. Re-enter your access code correctly.
When you enter a valid access code:
• The keypad sounds 6 fast beeps.
• The red (Armed) light turns ON.
• The exit time begins and the keypad beeps once every second. The keypad
beeps quickly (twice per second) for the last 10 seconds of the exit time.
3. Exit the premises through the entry/exit door. Doing this tells the system that
you are away, and the system turns on all the interior zones.
At the end of the exit time, all keypad lights, except the red (Armed) light, turn
OFF. The system is now on.
NOTE: If the yellow (Trouble) light is ON, there could be one or more zones
not turned on. See Turning Off Part of Your System (Bypassing Zones) on
page 15. If you turn on the system with a zone bypassed or a trouble
present, your security protection is reduced.
Away Button
You may also be able to quickly turn on your system in Away mode using the
Away
button on your keypad. Press and hold it for two seconds to turn on
the system in Away mode.
Your installer will tell you if this feature has been enabled on your system.
What to do if
the Siren
Sounds
Immediately
After You Exit
In order to reduce false alarms, the system can notify you of an improper exit
when turning on the system in the Away mode. If you do not securely close the
entry/exit door during the exit time, the keypad will emit one continuous beep and
the siren will sound.
If this occurs:
1. Re-enter the premises.
2. Enter your [access code] to turn off the system. You must do this before the
entry time ends.
3. Turn the system on again, making sure to close the entry/exit door properly.
(See
Turning On Your System When Everyone is Away (Away Mode)
.)