User's Guide
Table Of Contents
- Quick Reference Guide
- The following chart lists the basic functions of your system, and the keys to press for each func...
- Turn on system (Away): [access code], leave through entry/exit door 9 OR press Away (if enabled)
- Turn on system (Stay): [access code], do not leave premises 10 OR press Stay (if enabled)
- Turn off system: [access code] 8
- Turn on system (No Entry Time): [access code] 11
- Turn on system (Quick, if enabled): (from Ready state) 10
- Turn on rest of system (if Stay armed): OR press Interior (if enabled) 10
- Exit premises when system on: OR press Exit (if enabled) 12
- Turn off zones (Bypass): [two-digit zone number(s)], to exit 15
- Test system [master code] 17
- Send Fire message: (press & hold for 2 seconds, if enabled) 14
- Send Auxiliary message: (press & hold for 2 seconds, if enabled) 14
- Send Panic message: (press & hold for 2 seconds, if enabled) 14
- Silence fire alarm: [access code] 13
- Silence intrusion alarm: [access code] 14
- Turn door chime on/off: to toggle on or off 20 OR press Chime (if enabled)
- Check alarm memory: 14
- Check troubles 16
- Set time and date: [master code] 20
- Table of Contents
10
Tur ning On
Your System
While You Are
At Home (Stay
Mode)
Use the Stay mode when you want to stay at home, and also want to prevent
unauthorized entry from outside. The system will only turn on the perimeter zones
(e.g., door and window contacts), and will leave the interior zones off (e.g. motion
detectors) so that you will be free to move around inside.
1. Check that your system is ready (green Ready light is ON)
2. Enter your [access code]. As you enter each digit, the keypad sounder beeps.
If you entered the access code incorrectly, the keypad sounder will buzz steadily
for two seconds. Re-enter your access code correctly.
When you enter a valid access code:
• The keypad sounds 6 fast beeps.
• The red (Armed) light turns ON.
• The bypass message is displayed.
• The exit time begins and the keypad beeps once every second. The keypad
will beep twice per second for the last 10 seconds of the exit time.
3. DO NOT leave through the entry/exit door. This tells the system that you are not
leaving, and the system automatically turns off the interior zones.
At the end of the exit time, all keypad lights, except the red (Armed) light, will
turn OFF. The system is now on.
Re-activate bypassed zones
To turn on the rest of the system when it is in Stay mode:
1. Press or the
press
Interior
function key. The interior zones are now
on.
NOTE: When you have turned on the interior zones, you will not be able to
enter areas protected by motion detectors, or open doors and windows. To
access these areas, you must enter your [access code] and turn off the sys-
tem.
Stay Button
You may also be able to quickly Stay arm your system using the
press
Stay
function button on your keypad.
If your installer has programmed this button
,
press and hold it for two seconds to turn your system on in Stay mode.
Tur ning On
Your System
With No
Access Code
(Quick Arm)
Your installer will tell you if the Quick Arm method is enabled on your system.
Using the following method, you can quickly turn on your system without having
to enter an access code.
1. Check that the system is ready (green Ready light is ON)
2. Press .
• The keypad sounds 6 fast beeps.
• The red (Armed) light turns ON.
• The exit time begins and the keypad beeps once every second until the
end of the exit time.
1
*
*
0