User`s manual

4. Getting Started

The following sections provide step-by-step instructions on setting

up your MemoryFrame for the first time.

4.1 Unpacking your MemoryFrame™

In the retail box, the MemoryFrame unit is wrapped in a cardboard

shock-absorbent holder. DO NOT RIP the plastic “shrink-wrap”

portion when removing the unit. Instead, remove the entire

cardboard shock-absorbent holder from the box, and unfold the

cardboard so that it lies flat. After unfolding the cardboard, you can

gently slide the MemoryFrame from out of the “shrink-wrap”

material. Next refold the cardboard shock-absorbent holder and

place it back in the retail box. Save the box so you can pack or store

the unit in the future.

The MemoryFrame MF-810 retail pack includes:

• MemoryFrame™ Electronic USB Digital Picture Frame

• Wood 8x10 decorative frame (may be already attached to unit)

• External power supply with cable

• USB Cable (2 meters)

• Digital PixMaster™ PC compatible photo slideshow software

and USB Drivers on CD-ROM

• This Users Manual

• Mail-in registration/warranty card (inserted into manual)

If something is missing from the above list, contact customer service

at the following phone number

North America: 888-999-0732 or 949-252-1111

Europe: +353-61-702029

4.2 Registration & Your Product Serial Number

Please record the model and serial number from the bar coded label

located on the rear of the MemoryFrame to keep for reference. The

serial number is required for Technical Support and Product

Registration. See Figure 1 for location of model and serial number.