Specifications

C.12
Dimensional Drawings
C
GE Power Controls
Connected 414
Must not be removed
or fitted horizontally
Ventilation
Minimum clearance
to cassette side.
382 to door
35 Test
50 Disconnected
275 Fully withdrawn
Fascia
centre
Fascia
centre
Centre line of
operating panel
Centre line of
operating panel
Copperwork must be supported within 200mm of breaker connections – busbars or cables.
All connections to be tightened to 50Nm.
ACB fascia
cut-out dimensions
The cut-out
dimensions give an
approximate nominal
clearance of 3mm
around ACB fascia.
These sizes are for
guidance and can be
scaled if a different
aperture is required.
Copperwork must be supported within 200mm of breaker connections – busbars or cables.
All connections to be tightened to 50Nm.
382 to door
Must not be removed
or fitted horizontally
Fascia centre
Fascia centre
Centre line of
operating panel
Centre line of operating panel
Connected 414 35 Test
50 Disconnected
275 Fully withdrawn
Ventilation
Minimum clearance
to cassette side.
ACB fascia
cut-out dimensions
The cut-out
dimensions give an
approximate nominal
clearance of 3mm
around ACB fascia.
These sizes are for
guidance and can be
scaled if a different
aperture is required.
Rear Access Connection
Withdrawable Pattern
Type S - 4 pole - Frame size 2, In = 4000A (max)
Type S - 3 pole - Frame size 2, In = 4000A (max)