Model NV-800 User Manual
Table of Contents 1. Introduction ......................................................................................................................................................................................3 2. Package Contents .............................................................................................................................................................................3 3. About the Digital Picture Frame.................................................................
1. Introduction Congratulations! You are the proud owner of a NuVuetm Digital Picture Frame. Boasting high-quality image resolution, the NuVuetm is the perfect product for displaying your favorite digital photos. With its ease of use and configuration, you can now display all your favorite pictures for everyone to see! Safety Instructions 2. Package Contents Before using the NuVuetm, be sure to check all the accessories contained in the package. NuVuetm comes with the following items: 1.
3. About the Digital Picture Frame This section describes the various parts of the NuVue Picture Frame.
4.
5. Getting Started 5.1 Using the Stand The NuVue Picture Frame can be placed in a landscape or portrait position by rotating the stand to the appropriate position. This is ideal for desktop, end table, or any other flat surface. By removing the screw, the unit can also be mounted on a wall. Remove the screw 5.
5.4 Connecting to a TV 1. Insert the AV cable (yellow) video plug into the TV video socket. 2. Insert the AV cable (white and red) audio plugs into the TV’s corresponding AV IN sockets. If the TV only has one audio in socket, insert either of the audio plugs. 3. Insert the other end into the NuVue Picture Frame AV OUT socket. 4. Make sure the NuVue Picture Frame is set to the right TV system, NTSC or PAL. AV IN R 5.5 L VIDEO Connecting to an Amplifier 1.
5.7 Inserting Other Types of Cards (SD/MMC/XD/MS/MS ) 1. Position the SD/MMC/XD/MS/MS cards so that the pin hole connections are facing the MMC flash memory card slot. Place the card with the label side up. 2. Slide the card gently into the slot until it touches the bottom. 5.8 Removing a Memory Card To remove a memory card, gently pull the card out of the slot. 6. Replacing Remote Control Battery 1- Remove the battery compartment by pulling the cover in the direction of the arrow.
7. Menu System 7.1 Photo On the main menu, use the►/◄ buttons to choose “Photo” and press “ENTER” button to enter “Photo” mode. You can view photos as thumbnails in matrix images which can be set in Digest Style mode. Use ►/◄ & ▲/▼ buttons to select a photo. Press “ENTER” button to view a photo selected. Press “ENTER” button to view a photo selected. 7.2 Video On the main menu, use the ►/◄ buttons to choose “Video” and press “ENTER” button to enter Movie Folders. Movie folders will be displayed.
Choose the movie folder to be displayed and press “ENTER”. 7.3 Audio On the main menu, use the►/◄ buttons to choose “Audio” and press “ENTER” button to enter “Audio” mode. Press “File Detail” button on remote control to enter Music Library. Press “EQ Set” button on remote control to select Music 2Equalizer types such as “rock”, “pops”, “ballad”, “dance”, “standard”, “classic”, & “jazz”. 8.
8.1 Photo Setup In SETUP menu, use ▲/▼ buttons to select “PHOTO SETUP”. Use “ENTER” button to enter “PHOTO SETUP” submenu. 8.2 Thumbnail Digest You can view photos as thumbnails. This is another way of browsing for a particular photo. Press ► button and then use ▲/▼ buttons to select “ON” or “OFF” setting mode. Press “ENTER” button to enter. 8.3 Transition Mode You can set the transition mode in “FAST” or “SLOW” speed. Press ► button and then use ▲/▼ buttons to select “FAST” or “SLOW” setting mode.
To Exit the PHOTO SETUP menu, choose “MAIN PAGE” mode & press “ENTER” button. 8.6 Music Setup In MUSIC SETUP menu, use ▲/▼ buttons to select “MUSIC SETUP”. Use “ENTER” button to enter “MUSIC SETUP” submenu. 8.7 Repeat Mode You can set the REPEAT mode in “ONE”, “OFF” or “ALL”. Press ► button and then use ▲/▼ buttons to select “ONE”, “OFF” or “ALL” setting mode. Press “ENTER” button to enter. To Exit the REPEAT mode, choose “MAIN PAGE” mode & press “ENTER” button.
8.8 Movie Setup In MOVIE SETUP menu, use ▲/▼ buttons to select “MOVIE SETUP”. Use “ENTER” button to enter “MOVIE SETUP” submenu. 8.9 Repeat Mode You can set the REPEAT mode in “ONE”, “OFF” or “ALL”. Press ► button and then use ▲/▼ buttons to select “ONE”, “OFF” or “ALL” setting mode. Press “ENTER” button to enter. 8.10 Digest Style You can set the DIGEST STYLE mode in “2X2”, “3X3”, “4X4” or “5X5” matrix. Press ► button and then use ▲/▼ buttons to select the matrix setting mode.
8.11 Slideshow Setup In SETUP menu, use ▲/▼ buttons to select “SLIDESHOW SETUP”. Use “ENTER” button to enter “SLIDESHOW SETUP” submenu. 8.12 Slideshow Mode You can set the SLIDESHOW MODE in “MANUAL” or “AUTO” mode. Press ► button and then use ▲/▼ buttons to select “MANUAL” or “AUTO” setting mode. Press “ENTER” button to enter. 8.13 Folder Repeat You can set the FOLDER REPEAT in “ON” or “OFF” mode. Press ► button and then use▲/▼ buttons to select “ON” or “OFF” setting mode. Press “ENTER” button to enter.
8.16 Auto Start You can set the AUTO START in “ON” or “OFF” modes. Press ► button and then use ▲/▼ buttons to select the “ON” or “OFF” modes. Press “ENTER” button to enter. 8.17 LCD Setup In LCD SETUP menu, use ▲/▼ buttons to select “LCD SETUP”. Use “ENTER” button to enter “LCD SETUP” submenu. LCD SETUP enables you to configure settings such as brightness, contrast, saturation, hue & backlight. 8.18 Brightness You can set the BRIGHT mode in level 1 to level 6.
8.21 Setup Values You can set the SETUP VALUES mode in DEFAULT Press ► button and then “ENTER” button to enter. 8.22 Preferences In SETUP menu, use ▲/▼ buttons to select “PREFERENCES”. Use “ENTER” button to enter “PREFERENCES” submenu. 8.23 TV Type You can set the TV TYPE in “MULTI SYSTEM”, “NTSC” or “PAL” modes. Press ►button and then use ▲/▼ buttons to select the modes desired. Press “ENTER” button to enter. 8.24 TV Display You can set the TVDISPLAY in “NORMAL/PS”, “NORMAL/LB” or “WIDE” modes.
8.26 OSD Language You can set the OSD LANGUAGE in “ENGLISH” or “CHINESE” modes. Press ► button and then use ▲/▼ buttons to select the modes desired. Press “ENTER” button to enter. 8.27 OSD Message You can set the OSD MESSAGE in “ON” or “OFF” modes. Press ► button and then use ▲/▼ buttons to select the modes desired. Press “ENTER” button to enter. 8.28 Setup Values You can set the SETUP VALUES only in DEFAULT mode. Press “ENTER” button to enter. 8.
9. File Explorer On the main menu, use the ►/◄ button to choose “File Exp” and press “ENTER” button to enter “File Library”. File Library menu will be displayed. 9.1 Copy In File Library menu, use ► button to enter submenu. Use ▲/▼buttons to select the COPY mode. 9.2 Delete In File Library menu, use ► button to enter submenu. Use ▲/▼ buttons to select the DELETE mode. In Delete mode, you can delete the files from internal memory or external memory.
9.3 Rename In File Library menu, use ► button to enter submenu. Use ▲/▼ buttons to select the RENAME mode. In Rename mode, you can rename the file name by using virtual keyboard. Use the ►/◄ & ▲/▼ buttons to rename the file name. Press “OK” button to confirm the new file name. 9.4 New Folder In File Library menu, use ► button to enter submenu. Use ▲/▼ buttons to select the NEW FOLDER mode. In NEW FOLDER mode, you can rename the NEW FOLDER name by using virtual keyboard.
To Exit the submenu, choose CANCEL mode & press “ENTER” button. 10. Troubleshooting Problem No display on LCD screen. No picture on TV Colors not coming on TV Not reading the flash memory card or there are on files. 11. Possible Causes What to do No power supply LCD Brightness at min level. LCD connector or LCD gone bad TV condition Cable connection Check the connection of AC adaptor and the unit. LCD Brightness might be at min level, toggle brightness up switch.
Digital Spectrum, Inc. 17811 Mitchell North Irvine, Ca. 92614 www.dsicentral.
