User Manual

VOYAGER User Manual

WiFi Control

When working with more than 7 Voya-

gers, you will need to connect to them us-

ing an external router. For that, all Voyagers

must be connected to the external router’s

network. This can be achieved using the

Voyager App.

In the Setup tab > Lamp Settings > Select

lamp/lamps* to be made into clients >

Choose a Network from the available net-

work list displayed in the app OR type in the

network name>Password>Connect.

Then, connect your device to the same

router. Open the Voyager app and press

“Add Lamps” to add Voyagers to the scene.

Voyagers WiFi supports 2.4Ghz and 5Ghz

networks.

*This action does not require to connect each Voy-

ager individually. It is recommended to turn Voyag-

ers into Clients (up to six) using the previous meth-

od.

Remember that you can also customize

your Voyagers’ SSIDs through the app.

You can also customize your router’s SSID

to follow the naming convention of a Router

Voyager. If you name your router’s network

as DS026XXXXXXXXXX_M, all Voyagers

set to Client mode will automatically con-

nect to that network.