Operating instructions

Getting started
04
29
En
Changing audio channels
Some TV programs are broadcast with both a main and a
Second Audio Program (SAP). You can change the TV
audio using the
AUDIO button.
• Press AUDIO to change the TV audio.
The current audio channel is displayed on-screen.
• If
SAP is selected, but there is no SAP channel being
broadcast, you will still hear the main audio channel.
• If the sound is poor quality when set to
Stereo , you
can often improve it by changing to
Mono .
Basic playback
This section shows you how to use your recorder for
playback of discs (DVD, CD, etc.), and for playback of
video from the HDD. More playback features, such as
repeat and program play, are covered in
Playback on
page 57.
Important
• Throughout this manual, the term ‘DVD’ means
playback-only DVD-Video discs and DVD-R/RW. If a
function is specific to a particular kind of DVD disc, it
is specified.
• Some DVD-Video discs don’t allow certain playback
controls to operate at certain points in the disc. This
is not a malfunction.
1 Press  STANDBY/ON to switch on.
Also turn on your TV and make sure that it is set to the
correct video input.
2 Press HDD to playback from the HDD, or DVD to
play a DVD.
If playing video from the HDD, skip to step 5 below.
3 Press  OPEN/CLOSE to open the disc tray.
4 Load a disc.
Load a disc with the label side facing up, using the disc
tray guide to align the disc (if you’re loading a double-
sided DVD-Video disc, load it with the side you want to
play face down).
• If you want to play a DTS audio CD, please first read
the note on page 31.
• Please see
Disc / content format playback
compatibility
on page 11 if you want to play a Dual
Disc (DVD/CD hybrid discs).
5 Press  PLAY to start playback.
• If you’re playing a DVD-Video or Video CD, a disc
menu may appear when you start playback. Use the
/// buttons and ENTER to navigate DVD disc
menus, and the number buttons and
ENTER for
Video CD menus.
• When playing video from the HDD, playback will
automatically stop after the end of a title is reached.
• See the following sections for more details on playing
specific kinds of discs.
6 To stop playback, press  STOP.
7 When you’ve finished using the recorder, eject
the disc and switch the recorder back into standby.
• To open/close the disc tray, press  OPEN/CLOSE .
Remove the disc before putting the recorder into
standby.
• Press
 STANDBY/ON to switch the recorder into
standby.
AUDIO
Mono SAP
Stereo
STANDBY/ON
OPEN/CLOSE
HDD DVD
ENTER
STOP
PLAY


DVR-530H_KU.book 29 ページ ２００５年４月１２日 火曜日 午後１２時１５分