Operating instructions

Using the TV Guide On Screen™ interactive program guide

Troubleshooting

• My listings disappeared after a power failure.

You should start to receive listings again within 24

hours.

• Some channel numbers that appear are incorrect.

You can correct them using the Change Channel

Display option under Setup.

•I haven’t received any program listings.

Listings usually appear within 24 hours after

successfully setting up.

– Check the connections between the recorder,

cable, antenna and the IR cable if you’re using a

cable box.

– Verify the Setup information under Change system

settings.

– Make sure that your cable box is switched on (if

applicable).

– Review screens four and five in the initial guide

setup section.

•A show I set to record didn’t record.

– Make sure the recorder is in standby before the

recording is due to start.

– For DVD recording, make sure there is a recordable

DVD loaded.

– Check that the recording appears in the Schedule

listing.

• The TV Guide On Screen system didn’t automatically

tune to a show that I set a reminder for.

– Check that the reminder appears in the Schedule

listing.

– If you have a cable box, check the placement of the

IR cable.

•I set a reminder with auto-tune, but the channel didn’t

change.

– Check the Schedule and make sure that the show

is listed as a reminder.

– Highlight the show in the Listings screen, press

then highlight

edit reminder

, then press

ENTER

. Make sure that the Auto-tune option reads

Yes

– The TV must be on when the reminder is due for

automatic channel tuning to work.

DVR-530H_KU.book 48 ページ２００５年４月１２日　火曜日　午後１２時１５分