User`s manual

AMBE-3000™-HDK Development Board
User’s Manual
Version 1.1
2BHDK Configuration
Page 15
DVSI Confidential Proprietary
Figure 11 Vocoder Settings Switches SW1 and SW2
Note: As viewed in Figure 11 Switch 1 is set to “ON” when the white switch is positioned to the left and
Switch 2 is set to “ON” when the white switch is in the up position.
Slide Dip-Switch Settings
Board Switches
Item Name Position Description
Echo Suppressor Control 1 Enable (Position OFF) / Disable (Position On)
Echo Canceller Control 2 Enable (Position OFF) / Disable (Position On)
Bit Rate 5 3
Bit Rate 4 4
Bit Rate 3 5
Bit Rate 2 6
Bit Rate 1 7
SW1
Bit Rate 0 8
Bit Rate Selection
See Table 23
PARITY ENABLE 1
Parity Enable (Position Off) / Disable (Position
On)
Boot up mode 2
Boot up mode 3
Boot up mode 4
See Table Table 19 HDK Boot-up Mode
Selection
ScomRate0 (LSB) 5
ScomRate1 6
ScomRate2 (MSB) 7
Sets the AMBE-3000™ UART Baud Rate See
Table 12
SW2
STAT/CONFIG0 8 Reserved
Table 11 Board Dip Switches