Specifications

Net-2000™ VCU Users Manual
Version 4.0, December, 2013
Net-2
000™-VCU Installation
The following command
example results are shown in the table below
adsh>network –h net2k1234 -w lab -i 192.168.1.100 -m 255.255.255.0 -g 192.168.1.250 -n 192.168.1.1 -d
domain.com
Arguments VCU Result Example
DHCP is NOT enabled
-h HOSTNAME net2k1234
-w Windows WORKGROUP lab
-i STATIC IP address 192.168.1.100
-m NETMASK IP address 255.255.255.0
-g GATEWAY IP address 192.168.1.250
-n NAMESERVER IP address 192.168.1.1
-d VCU DOMAIN NAME domain.com
Table 4 DHCP Setup Example
NOTE: Do not mix the -dhcp argument with the -i -m –d -g -n arguments.
Use the -i -m -g -n and -d options to set up a static IP address. The argument following the -i -m -g and -n options
should in the form of a dotted IP address (e.g. “192.168.0.1”). If a DHCP server becomes available at a later time, it
can be enabled by issuing the network command with the –dhcp plus the –w [workgroup] and –h [hostname}
arguments as show in the following command example.
adsh>network -dhcp –w[workgroup] -h[hostname]
After setting or changing the network settings, the VCU must be rebooted by typing “shutdown” at the console
terminal adsh> prompt.
adsh>shutdown
(Subject to Change) Page 8
DVSI CONFIDENTIAL PROPRIETARY