Specifications

Net-2000™ VCU Users Manual
Version 4.0, December, 2013
VO
IP Mode
4.11.2 Target IP Address
The Net-2000™-VCU can communication with another NET-2000™. To communicate (encode and decode to /
from) to another Net-2000™-VCU via Ethernet first select Ethernet as the Channel source. Next enter the IP
address or host name of the remote unit you are connecting to, in the Target IP address box located under the
Channel source pull down menu.
4.11.3 Port Number
The network settings page allows the operator to change the network port number for the communication channel.
The default port number is Port 4000. If a different port number is required enter in the desired port number and
select the configure button. Valid port numbers are greater than 1024 and less than 65535. Port numbers 4001,
4002 and 4003 are reserved by the Net-2000™-VCU and must not be used.
(Subject to Change) Page 29
DVSI CONFIDENTIAL PROPRIETARY