User manual

21
OSD MENU
*
(D2363D, D2363TIR)
EXPOSURE
BRIGHTNESS 0 ~ 100
SHUTTER 1/60, FLK, 1/120 ~ 1/100000
BLC OFF / ON , BLC (Back Light Compensation)
AGC
HIGH / MIDDLE / LOW / OFF
AGC (Auto Gain Control)
STARLIGHT
OFF / AUTO (x2 ~ x256)
x32 is recommended.
EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET
COLOR
WB MODE AWC / ATW / INDOOR / OUTDOOR / PUSHLOCK / MANUAL
R-Y GAIN 0 ~ 100
B-Y GAIN 0 ~ 100
DAY & NIGHT
Day & Night Mode
AUTO/ COLOR/ BW
COLOR --> BW: Switching from Color to BW; if the number is higher, the camera will
only switch during a super low light condition.
BW --> COLOR: Switching
from BW to color; this number should always be lower than
COLOR --> BW.
Read Time: Time interval to switch from Color to BW.
COLOR
B&W: BURST (OFF/ON); There is less noise when the BURST is OFF.
C-SUP
Color Suppression:
Color will be reduced at low illumination, if the C-SUP Level is higher. 0 ~
100 (Not Available when 3D-DNR is On.)
A-SUP
ApertureSuppression:
The sharpness of the edges will be reduced at low illumination, if A-SUP
Level is higher. 0 ~ 100 (Not Available when 3D-DNR is On.)
EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET