User Manual

PROGRAMMING - LED SETTINGS

Manual boost control (DW-ILIRIP940, DW-ILIRIP850, DW-ILWLIPM):

Start or stop the illuminator at the set boost power value on the slider bar. For example

100% light output for 5 seconds:

Start or stop the ﬂashing of the LEDs at the set boost power value on the slider bar. For

example 100% light output for 5 seconds:

Manual control digital output:

The manual control digital output function allows you to manually open or close the

illuminator’s relay outputs. A green circle indicates the relay output is closed. A red circle

indicates the relay output is open. By default, the illuminator’s output is set to open.