User Manual

PROGRAMMING - EVENTS
To edit the Photocell (Low light detection) event, click the edit button on the right-hand side
of the screen. The following pop-up screen will appear. You can adjust the following settings:
Delay (Default 2 seconds) The time (in seconds) for which light level conditions must
be met for the illuminator to turn on or o.
Time-out (Default 5 seconds) The time (in seconds) before the illuminator turns on or o
once light conditions are no longer met.
Lux level (Default 15 lux) The light level when the camera turns on or o.
To edit the Photocell (Low light detection) action, click the edit button to the right of the
action. The following pop-up screen will appear. You can change the action taken by the
illuminator when the event settings are met and adjust the start and stop actions.
11