User Manual

PROGRAMMING - LED SETTINGS
LED SETTINGS - DW-ILIRIP940, DW-ILIRIP850, DW-ILWLIPM
To set the illuminator’s LED power settings, go to the ‘LED settings’ tab.
The user can reset the LED settings by clicking the factory default button on the bottom of
the page.
Manual control standard:
Turn on or o the illuminator at the set power value on the slider bar. For example 80% light
output.
Manual control energy save:
Turn on or o the illuminator at the set energy-saving power value on the slider bar. For
example 50% light output.
12