User Manual

PROGRAMMING -
DEVICE CONFIGURATION
DEVICE CONFIGURATION
Edit the device’s network, Control4, and password, or reset the device to factory settings.
1. The illuminator supports static IP only. Enter the IP address, subnet mask and default
gateway as needed. Contact your network administrator for more information.
2. Enter the HTTP (default 80) server port and host-name.
3. If the illuminator is integrated with Control4, use the Control4 section as needed.
If the network settings have changed, reload the page with the new IP address.
4. To change the admin’s password, enter the new password twice and click ‘save’.
5. To reset your device to its factory setting, choose one of the following options
• All: Reset all settings to factory default.
• Exclude network settings and user credentials: Reset the events and device settings.
15