User Manual

DW Spectrum 3.0
Rev. 072017 Page | 106
May be caused by
All Events.
Why Action may work incorrectly
Event is not configured properly. See the Event description for details.
Perform HTTP Request
Sends a special HTTP Request to an external system when the specific event occurs. For instance, external system may
be access control system or alarm/monitoring system.
DW Spectrum can also receive the HTTP request as events. See "Generic Event".
Basic Parameters
 HTTP URL – the HTTP link to the external system that listens to the request
 Login and Password – authentication details for the external system (required if the system requires
authentication)
 HTTP Content – the content of HTTP request.
Why Event may work incorrectly
HTTP request is malformed. Check the syntax
External system requires authorization and no or incorrect credentials were specified
Event is not configured properly. See the Event description for details.
Write to Log
Writes the record to Log when Event occurs.
By default, all Events mentioned in Rules are written to Log. However, in some cases it may be necessary to disable all
notifications but certain types of Events in Log. In this instance, create Rule with this particular type of Action.
Basic Parameters
None
Advanced Parameters
Aggregation (Interval of action): no more than once per certain amount of time (to reduce the amount of events), or
instant.
May be caused by
All Events.
Why Action may work incorrectly
Event is not configured properly. See Event description for details
Too long interval of action is set. Try "instant".