User Manual

DW Spectrum 3.0
Rev. 072017 Page | 107
Default Rules
As soon as DW Spectrum is installed, default Rules are set up.
The following Events
 Device Disconnection/Malfunction
 Storage Failure (including "Disk Is Full")
 Network Issue
 Device IP Conflict
 Server Failure
 Servers Conflict
 Server Started.
will result in
 Notifications to all Users (no more than once per 30 seconds).
 Mail Notifications for admin. To receive mail notifications, E-Mail Server must be configured (see "Configuring Mail
Server for E-Mail Notifications") with e-mail address specified for admin (see "Changing User Settings").
 Write to Log.
Viewing Events Log
Each event that occurs in DW Spectrum is stored in Event Log. Event Log makes it easy to navigate through past
activity or diagnose Device or Server. To view the log, proceed with one of the following:
 Open Main Menu and go to Event Log (Ctrl + L)
 Open Notification Panel on the right and click .
 To view Events that occurred on a particular Device: open Device's Context Menu and choose Check Device
Issues...
The data is broken down by the following columns: