User Manual

DW Spectrum 3.0
Rev. 072017 Page | 22
 and – Cameras and I/O Modules (Devices). Displayed under Servers (admin only) and Layouts. If Device
appears on more than one saved layout, the device will be listed multiple times in Resource Tree.
Devices can have additional statuses:
 or – Device is offline for various reasons (see "Diagnosing Offline Devices").
 or – unauthorized Device (see "Configuring Device's Authentication").
The following indicators are displayed on the left:
– Device is in recording mode
– recording is set up for Device, but not recording at the moment.
Additionally Devices' IP addresses are displayed (if the setting is enabled, see below).
If Device is experiencing network issues over the past minute, "!" is displayed on the right. See "Device
Disconnection/Malfunction" for details.
When hovering over Camera with a mouse cursor, a thumbnail of a frame taken from the Camera will appear.
 – Recorders (admin only). Displayed under Servers and contain several channels (represented as Cameras).
 – Video Walls (admin only). See "Video Wall Management" for details.
 – Layouts. Contains resources (devices and local files). Owned by users and displayed under each user. Locked
layouts are dilspayed like this: (see "Locking Layouts").
 – Web Pages. See "Locking Layouts".
 – Users (Administrator can view several users in Resource Tree).
 – Other Systems – Servers in local network that belong to different systems. See "Configuring Multi-Server
Environment (Admin Only)".
 – Local Files. Contains the following:
 Local Video files
 Exported Video Files (see “Exporting”)
 Exported Multi-Video Files and their contents: Cameras, or Local Files (see “Exporting the Layout in Multi-Video
Format"
 Screen Recordings (see “Screen Recording”)
 Images
 Screenshots (see “Taking a Screenshot”).
Items that are currently placed on Scene are highlighted in bold in Resource Tree. A selected (focused) Item it has
the“>” mark in both Server and Layout sections.
To enable/disable displaying IP addresses in Resource Tree:
1. Open Main Menu and go to Local Settings
2. Select/clear the flag in Show IP in Tree option (Look and Feel section).
Viewer's Resource Tree contains only Layouts, Devices and Local Files.
If Client is not connected to Server, only Local Files and Other Systems are visible.
The following actions can be performed in Resource Tree: