User Manual

DW Spectrum 3.0
Rev. 072017 Page | 50
To specify Aspect Ratio:
1. Open Camera Settings and go to General.
2. Enable Force aspect ratio flag and select the desired ratio. The following AR are available: 1:1, 4:3, 16:9.
3. Disable the flag to restore the original Aspect Ratio.
4. The settings are applied once Apply or OK are clicked.
Setting up Camera Orientation
Sometimes Cameras can be mounted rotated by 90 degrees or upside down. In such instance, DW Spectrum can
display proper orientation.
Note: this correction will require transcoding if exporting videos from Camera. See "Exporting Recorded Region
from Single Camera".
To specify Orientation:
1. Open Camera Settings and go to General.
2. Enable Default Rotation flag and select the desired orientation.
3. Disable the flag to restore the original orientation.