User Manual

DW Spectrum 3.0
Rev. 072017 Page | 54
 Setting Up Home Positions or Tours (see "Home Positions and Tours for PTZ and Fish-Eye Cameras")
 Extended (Zoom, Point and additional features). Requires the support for Absolute Move from Camera and
custom integration:
In this case Camera allows moving and zooming as in previous case, plus:
 Move to a certain position – Left Click to the desired position
 Zoom to a certain range – Hold Left Mouse Button and draw the rectangle to zoom into (see the above picture)
 Full Zoom Out – Double Click.
 Fish-Eye Cameras/Screenshots support full PTZ functionality.
After all settings are configured press once again to hide PTZ controls.
Saving and Restoring PTZ Positions
In addition to standard PTZ controls, DW Spectrum allows for managing of predefined PTZ positions. It is basically
possible to set up several points, tilt and zoom presets and restore them with only two clicks or one hot key.
Then PTZ presets can be used for composing PTZ Tours (see "Setting Up PTZ Tours") or serve as a Home Position (see
"Home Positions and Tours for PTZ and Fish-Eye Cameras"). Finally, a specific position can be restored if an event
occurs. See "Execute PTZ Preset".
Note: It is possible to configure PTZ on Cameras for Administrators and Viewers with the appropriate permission
level.
The following is possible:
Saving PTZ positions (simple):