User Manual

DW Spectrum 3.0
Rev. 072017 Page | 55
1. Set up a desired PTZ Position on Camera using PTZ Controls (see "Setting up and Controlling PTZ on PTZ and
Fish-Eye Cameras")
2. Open Context Menu by right –click on the PTZ icon and select PTZ... -> Save Current Position...
3. Type a desired preset name.
4. If needed, select a hot key for preset (0-9).
Saving and Editing PTZ positions (advanced):
1. Open Context Menu right –click on the PTZ icon and select PTZ... -> Manage. The following form will appear:
2. Move the form aside, so that the item and its PTZ controls are fully accessible.
3. Set up a desired PTZ Position on Camera using PTZ Controls (see "Setting up and Controlling PTZ on PTZ and
Fish-Eye Cameras").
4. Click Save Current Position.
5. To edit positions set Hotkey and Name if necessary.
6. Set Home Position if necessary (see "Home Positions and Tours for PTZ and Fish-Eye Cameras")
7. Click Apply or OK when finished. To discard changes, click Cancel.
Restoring PTZ positions:
Open Context Menu and choose PTZ... -> Go to Position... -> <Desired position> or press the predefined hot key (0-9).
It is also possible to restore PTZ Positions in Manage PTZ window (Go to Position):
Deleting PTZ positions:
1. Open Context Menu and select PTZ... -> Manage ...
2. Select a desired preset and Click Delete.
IMPORTANT. If Position is included in Tour, the deletion may make this Tour invalid.
3. Click Apply or OK when finished. To discard changes, click Cancel.