User Manual

DW Spectrum 3.0
Rev. 072017 Page | 62
3. Check desired Cameras the schedule should be copied to. To select all Cameras on specific Server check it. To filter
search use the Filter box. Filter criteria is the same as search (see "Search"). If hover with a mouse cursor on
Camera, the actual picture from this Camera will be displayed on the right.
Note: additional Licenses may be needed. See "Obtaining and Activating DW Spectrum Licenses" for details.
4. Click Apply or OK when finished. To discard changes, click Cancel.
Configuring Maximum and Minimum Recording Days for Camera
Some governmental regulations require the footage to be stored for a specific length of days. DW Spectrum supports
the ability to set up maximum and minimum recording days.
IMPORTANT. Be careful with minimum days. These settings do not guarantee this to be kept, they just set the
priority. So, in case of insufficient space DW Spectrum will delete the records on cameras that do not have minimum
amount of footage. However if there is no space to store such amount of data, no other cameras will be recorded.
To specify minimum and maximum amounts:
1. Select the desired Camera(s) in Resource Tree (use SHIFT or CTRL to select several) or on Scene, open Camera
Settings and go to Recording.
2. Set Min. Days and Max. Days.
Setting up Motion Mask and Motion Sensitivity
In order to detect motion more properly and accurately, DW Spectrum provides a powerful and flexible Motion
Detection configuration. For example, if a camera is pointed at a parking lot, motion mask can be set on all the
surrounding areas that are not targeted for recording. In this case, any motion appearing in the areas surrounding the
main target area, will not trigger motion detection and recording.