User Manual

DW Spectrum 3.0
Rev. 072017 Page | 71
To move device(s) from one server to another:
1. Hold Ctrl or Shift to select the desired devices in Resource Tree
2. Drag and drop the selected devices to the desired server
IMPORTANT. In order to be able to see video from Device on a new Server, the devices must be accessible and
discovered by this server. Otherwise it will be displayed offline.
Also devices may be swapped automatically during failover. If Server failure occurs, all Cameras can be moved to other
Servers automatically. See "Configuring Failover".
Deleting Devices (Admin Only)
To delete Device(s):
1. Expand the Server hosting the desired server in Resource Tree.
2. Find and select Device.
3. Right-Click for Context Menu and choose Delete (or the Del button on a keyboard).
4. Click Yes to confirm.
Note: If Device is online it will be auto-discovered again in some time (this doesn't apply to devices that have
been added manually). To avoid this either unplug the device or disable automatic device discovery.
If Device is back online, it will start working immediately. Recorded archive will be available as well; however, a user
will need to reconfigure Device as its settings have been erased. To prevent this from happening, User must disable
automatic discovery. See "Disabling Automatic Discovery (Admin Only)" for details.
If Camera is disconnected, then the archived footage on this Camera becomes unavailable. However it can be restored.
See "Viewing Archive from Deleted Cameras".
Configuring Events and Actions (Admin Only)
DW Spectrum provides powerful and flexible event bus than can be used for simple and intuitive programming of any
algorithm.
Algorithms are a set of Rules. Each Rule is a combination of Event-Action. As soon as Event is fired up, DW Spectrum
triggers the appropriate Action.
The following events and actions are supported:
Events:
Actions:
 Setting up Schedule for Tracking EventsX
 Motion on Camera
 Device Disconnected
 Storage Failure
 Network Issue
 Camera IP Conflict
 Server Failure
 Notifications
 Visual Event Indication
 Mail Notifications
 Start Recording on Camera
 Start Panic Recording
 Trigger Output on Device