User Manual

DW Spectrum 3.0
Rev. 072017 Page | 72
 Servers Conflict
 Server Connection LostX
 License Issue
 E-mail address is not set(Sys)
 E-Mail Server is not Set(SYS)
 Error while Sending E-Mail
 Storage is not Configured
 Server Started
 Archive Backup Finished
 Generic Event.
 Play Sound
 Speak
 Notifications
 Visual Event Indication
 Showing Cameras on Alarm Layout
 Mail Notifications
 Configuring Mail Server for E-Mail Notifications
 Start Recording on Camera
 Start Panic Recording
 Create Bookmark
 Trigger Output on Device
 Play Sound
 Repeat Sound
 Speak
 Execute PTZ Preset
 Display text on Cameras
 Perform HTTP Request
 Write to Log.
Every Event that has occurred is automatically saved in system's Event Log. If no Rules are active, only system issues
will be saved. See "Viewing Events Log" for details.
IMPORTANT. Some default Rules are already configured. See "Default Rules" for details. It is possible to reset all
Rules configurations to default settings. To reset, click on Restore all Rules to Default and Apply or OK. All
previously configured Rules will be discarded.
To configure Rules:
1. Do one of the following:
 To configure Global Rules: open System Administration and press Alarm/Event Rules button on the General tab
(or press CTRL + E). It is possible to configure Rules for specific Device(s). To proceed, type the desired Device
name, IP or MAC address into the Filter box. Only Rules that are applied to a corresponding Device will be
displayed.
 To configure Rules for a single Device: open Device's Context Menu and select Device Rules or open Device
Settings, then click Device Rules...
The following dialog will open: