User Manual

DW Spectrum 3.0
Rev. 072017 Page | 75
Setting up Schedule for Tracking Events
Events can be tracked based on the schedule. For instance, Motion can be tracked only on weekends and Input Signal
– at 8PM-8AM.
The schedule can be configured as advanced parameters for the desired Event:
1. Open Event Advanced Parameters by clicking on Advanced on the Alarm/Event Rules form. The advanced settings
will be displayed on the bottom.
2. Click on Schedule... The following form will be displayed:
3. Select On or Off to enable/disable monitoring in particular cells.
4. Click on Schedule Grid:
 Click and Drag to select multiple cells
 Click on hour to select an entire column
 Click on weekday to select an entire row
 Click Schedule Grid's top left corner to select all cells
The above example shows that the event is tracked on workdays (Sun-Fri) since 8AM till 8PM.
By default, events are always tracked.
Motion on Camera
Occurs if motion is detected on Camera(s).
Basic Parameters
Camera(s) motion is detected on. To specify: