User Manual

DW Spectrum 3.0
Rev. 072017 Page | 80
None
Advanced Parameters
Schedule (see "Setting up Schedule for Tracking Events").
Why Event may work incorrectly
Notifications for this type of Event is hidden in system settings. See "Notifications" for more details.
Input Signal on Device
Occurs if input signal is detected on Device(s). DW Spectrum may detect input signals on the following Devices:
 ONVIF-compliant (input support via ONVIF may vary from Device to Device)
 Axis.
Basic Parameters
Device(s) the input signal is detected on. To specify:
1. Click on Any Device at the desired row on the Alarm/Event Rules form (see "Configuring Events and Actions
(Admin Only)").:
Note: Devices that do not support input, are highlighted in red.
2. Check the Devices to detect input, then click OK (Cancel will discard changes).