User Manual

DW Spectrum 3.0
Rev. 072017 Page | 90
Showing Cameras on Alarm Layout
DW Spectrum provides the ability to dynamically create Alarm Layouts. They allow bringing specific Cameras to User's
attention when a specific Event occurs. In this case a dynamic layout is created and the corresponding cameras are
placed on it. This layout is displayed in the following way:
For instance, Rule can be configured as follows: if motion occurs on cameras 1 or 2, cameras 2, 3 and 4 will be placed
on Alarm Layout.
Basic Parameters
Camera(s) to show on Alarm Layout. To specify:
1. Click on Select at least one camera in the desired row on the Alarm/Event Rules form (see "Configuring Events
and Actions (Admin Only)"). The following form will appear:
2. Check the cameras to display, then click OK (Cancel will discard changes).
To select all Cameras on a specific Server, check the corresponding box. To filter search, use the Filter box. Filter
criteria is the same as search (see "Search"). It is possible to Drag'n'Drop the selected Cameras from Resource Tree
onto the Action's advanced settings form.
Advanced Parameters