User Manual

DW Spectrum 3.0
Rev. 072017 Page | 91
Aggregation (Interval of action): no more than once per certain amount of time (to reduce the amount of events), or
instant.
Users to show alarm to – it is possible to show Alarm Layout to certain Users. If several Events are configured to show
different Cameras on alarm layout for the same User, the corresponding Cameras will be added upon the Event
occurrence. If several Events are configured to show different Cameras on alarm layout for different Users, each User
will see the separate Alarm Layout.
Force Alarm Layout opening – if checked, when Event occurs Alarm Layout will show up immediately. If not, the
Alarm Layout will be created, but the user will still be watching the current layout and will be able to switch to Alarm
Layout.
Also show source camera – available only if Event is bound to Cameras. If checked, when Event occurs Alarm Layout
will contain camera that created Event. For instance, if Rule is set up to show Cameras 2 and 3 and if motion occurs
on Camera 1, Alarm Layout will contain Cameras 1, 2 and 3. If unchecked, it will contain only Cameras 2 and 3.
May be caused by
All Events.
Why Action may work incorrectly
Alarm Layout is not showing to a certain User
Event is not configured properly. See the Event description for details
Too long interval of action is set. Try "instant".
Mail Notifications
DW Spectrum can send E-mails to Users or to additional addresses when Events occur.
IMPORTANT. E-Mails cannot be sent if E-Mail Server is not configured. In this case, E-Mail Server is not
Configured notification is shown up. See "Configuring Mail Server for E-Mail Notifications" for more details.
Basic Parameters
Users the E-Mails should be sent to:
To filter search, use the Filter box. Filter criteria is the same as search (see "Search"). It is possible to Drag'n'Drop
selected Users from Resource Tree onto Action's advanced settings form.
IMPORTANT. E-Mails will be sent to Users' E-Mail addresses. If E-Mail address is not configured for User, then the
user cannot receive E-Mails (see above). E-mail is not Set for Users notification is generated in this case. See
"Changing User Settings" for information on how to set up E-Mail for User.
Note: To send E-Mails to additional addresses, see advanced parameters.
Advanced Parameters