User Manual
DW Spectrum 3.0
Rev. 072017 Page | 93
Configuring Mail Server for E-Mail Notifications
In order to send Mail Notifications on Events, E-Mail Server should be configured. To configure E-Mail Server:
1. Open Main Menu –> System Administration (CTRL+ALT+A) and swith to the Email tab.
2. Choose quick or advanced E-Mail Server setup (see below for reference).
3. When finished, press OK to apply or Cancel to discard settings.
Quick E-Mail Server Setup
E-Mail/Password – address and password of the mail account, which will be used for outgoing mail. DW
Spectrum will handle the rest.
Note: click Test to ensure that the settings are correct. If test fails:
If the result is "Cannot test such parameters", the domain name is not supported. It is necessary to switch to
Advanced mode and set up the server manually.
If the result is different, the error message will be displayed:
Advanced E-Mail Server Setup