User Manual
Table Of Contents
- Working with DW Spectrum
- Opening and Closing DW Spectrum Client
- Connecting to DW Spectrum via Web-Client
- Launching DW Spectrum in Compatibility Mode
- Connecting to Enterprise Controller and Working Offline
- Introducing User Roles
- DW Spectrum User Interface Overview
- DW Spectrum Quick Start
- Obtaining and Activating DW Spectrum Licenses
- Obtaining and Configuring Media Server’s Additional Settings (Admin Only)
- Cameras and Encoders Management
- Viewing Full Camera List
- Adding Cameras and Encoders
- Setting Up Cameras
- Setting up Analog Cameras
- Renaming Cameras
- Obtaining Camera’s IP, MAC, Firmware and Model
- Configuring Audio on Camera
- Configuring Camera's Authentication
- Setting up PTZ
- Setting Up Fish-Eye Cameras
- Setting up Recording Schedule
- Setting up Motion Mask and Motion Sensitivity
- Configuring Proprietary Camera Parameters
- Adjusting Secondary Stream Quality
- Setting Same Parameters for Multiple Cameras
- Swapping Cameras between Media Servers (Admin Only)
- Diagnosing Offline Cameras
- Deleting Cameras (Admin Only)
- Configuring Events and Actions (Admin Only)
- Tracked Events
- Setting up Schedule for Tracking Events
- Motion on Camera
- Camera Disconnection/Malfunction
- Storage Failure
- Network Issue
- Camera IP Conflict
- Input Signal on Camera
- Media Server Failure
- Media Servers Conflict
- EC Connection Lost
- Licenses are not Configured
- E-mail is not Set for Users
- E-Mail Server is not Configured
- Error while Sending E-Mail
- Storages are not Configured
- Actions that DW Spectrum Can Do
- Default Rules
- Viewing Events Log
- Tracked Events
- User Management
- Layout Management
- Creating New Layout
- Setting up Layouts
- Assigning Layouts to Users (Admin Only)
- Deleting Layouts (Admin Only)
- Opening and Closing Saved Layouts
- Backing up and Restoring DW Spectrum Database
- Playback in DW Spectrum
- Screen Recording (Windows Only)
- Upgrading DW Spectrum
- Troubleshooting and Contacting Support
- Glossary
123
DW Spectrum User Manual
Digital Watchdog
Assigning Layouts to Users (Admin Only)
To duplicate Layout for another User(s), Drag and Drop Layouts within Resources Tree:
Administrator can then modify Layouts as needed.
Deleting Layouts (Admin Only)
To delete Layout from Resource Tree:
1. Find and select desired Layout(s) in Resource Tree.
2. Invoke on Context Menu and choose Delete Layout (or press Del).
3. Accept deletion by clicking on Yes or press Cancel to discard all changes.
If the layout that is opened on another computer is deleted, all items will disappear.
Note: Locked Layouts cannot be deleted!
Opening and Closing Saved Layouts
As User logs into DW Spectrum, all existing Layouts are listed in Resource Tree. To open an existing
Layout, find the desired layout in Resource Tree and perform one of the following:
Drag and Drop Layout from Resource Tree to Scene:
Open Context Menu and choose Open Layout (or press Enter).
To open multiple Layouts, select the desired layouts in Resource Tree (using Multi-Selection) and do one