User Manual

2. Do not drop, give strong vibration, or shock to the product. It may cause malfunction.
3. The air inhaler of the front panel and air outlet of the back panel must not be blocked during
installation.
The internal temperature of the product would be greater than allowable and could cause
malfunction or fire.
4. Do not touch the product or the power cord when there is thunder. It may cause electric
shock.
5. Do not install the product near or on top of heating source. The internal temperature of the
product would be greater than allowable and could cause malfunction or fire.
6. Do not install the product on inclined or unstable location or where vibration could be
committed. It may cause malfunction.
Cautions about the Power
Warning
1. Must use the outlet of the grounding to connect the power cord, or it may cause fire.
2. Do not connect on the middle of power cord or use extension cord. It may generate heat or
cause fire.
3. Do not touch the power cord with wet hands. It may cause electric shock.
4. Keep power cord dry and protect from humidity. It may generate heat or cause fire. The
power cord is not waterproof.
5. Hold the body of the plug while removing the power plug. Do not pull the power cord.
Damage to the power cord may generate heat or cause fire.
6. Check the power plug regularly. Humidity and moderation in smoking may cause fire.
7. Remove power cord from outlet when product is not used for a long time. It may cause short-
circuit or electric shock.
Caution
1. Do not turn off the power by removal of the power plug. To turn off the power, click the power
button from the front panel. When the system stops abnormally, the power button might not
work. Click power button for 5 full seconds to turn power off.
2. Do not cut off the power artificially, or give shock or vibration to unit while the hard disk is
activating. It may cause hard disk failure or loss of data.
Remarks
※ Pictures and buttons are subject to be changed or modified up to different models.
※ Function or configuration is subject to be changed or modified without prior notice for
improvement of the product.