User Manual

User Manual | 6

1.4.3. IR Remote Controller (Optional Item)

 Power: system ON/OFF

 DVR ID selection

 Numeric button: channel selection or password

input

 PTZ button

 Preset button: select preset in PTZ mode

 Focus button: focus IN/OUT in PTZ mode

 ZOOM button: zoom IN/OUT in PTZ mode

 Preset tour: tour ON/OFF in PTZ mode

 Direction button

 Enter button

 Menu button

 Return button

 Playback buttons on search mode

 Emergency recording button

 Auto-sequence button in live mode

 Screen mode button

 Backup button

NOTE

User can control multiple DVRs with one IR remote controller.

In order to control multiple DVRs, each DVR must have a different remote ID.

(The default ID is set as “0”.)

To setup the ID # in IR remote controller:

1) Keep pressing ID selection button () for about 5 seconds.

2) Set the ID number by pressing numeric button on IR remote controller. ID

number is available from 000 up to 255.

3) You have to press numeric button as three-digit number format. For example,

press “000” for 0, “023” for 23, and “234” for 234.