Quick Start Guide

Quick Start Guide
4 CH 8 CH 16 CH
DW-VAC42T DW-VAC82T DW-VAC162T
DW-VAC43T DW-VAC83T DW-VAC163T
DW-VAC44T DW-VAC84T DW-VAC164T
DW-VAC46T DW-VAC86T DW-VAC166T
WHAT’S IN THE BOX
CD (QSG + Manual)
& Quick Start Guide
1 Set
12V DC and
Power Cable
1 Set
IR Remote Control 1 Set
Terminal Block
and Rubber Mount
1 Pair
(2 Pieces)
1 Set
USB Mouse 1 Set
Username: admin Password: no password
Attention: This document is intended to serve as a quick reference page for initial set-up.
It is recommended that the user read the entire instruction manual for complete and proper DVR usage.
Tel: [phone]
Technical Support Hours: 9:00AM – 8:00PM EST, Monday thru Friday
digital-watchdog.com
Quick Start Guide
Step 1 – CONNECTING THE DVR Step 2 – POWERING UP THE DVR
SAFETY TIPS
1. Mount and install all necessary cameras and external devices. Refer to their individual manuals for
additional information.
2. Place the DVR in its nal position. See installation tips below.
3. Connect all necessary cables to the DVR
4. Once all additional devices have been properly connected to the DVR, connect the DVR to
an appropriate power supply. The DVR will boot up automatically.
1. When the DVR boots up, it will be in protective mode. This
means you will not be able to access the DVR’s setup menu
until you enter the proper username and password.
2. To unlock the DVR, right-click anywhere on the screen. The
login screen will appear. (Default Username / Password:
admin / no password)
3. When the DVR boots up for the rst time, you will be guided
through the Startup Wizard.
1. Make sure the cameras and the monitors are properly connected to the DVR.
2. The DVR should be placed in a dust and moisture free environment. It must never be directly exposed to
sunlight. Server room temperature is highly recommended to reduce the chance of overheating, which
may cause the DVR to become unstable.
3. During the boot up process, the DVR should not be interrupted by pressing any buttons on the mouse.
Do not unplug the power adapter or turn the DVR off during the boot up process.
4. A UPS (Uninterrupted Power Supply) is highly recommended to prevent damage to the DVR during a
power outage.
AUDIO IN/OUT
CAMERA
PTZ CAMERA
CONTROL
POWER SUPPLYVGA MONITORHD MONITOR USB MOUSE ALARM
INPUT/OUTPUT
NETWORK PORT
HDMI
AUDIO OUT
AUDIO IN
TV / SPOT
1 2 3 4
5 6 7 8
VIDEO IN VGA OUT USB
DC 12V
PAL VGA/SPOT
NTSC TV-OUT
RS 485 SENSOR IN ALARM
OUT +
RS 485 SENSOR IN ALARM
OUT -
LAN
HD
VGA
Back Panel Ports may dier according to model
16 CH Model
4 CH and 8 CH Models