User Manual

29
4.1.2. USER
The ADMIN user (default password is no password) has full authority for system setting, allowing this user to
change the system password or add/delete users and assign different permission leves to each user.
Note
Maximum number of users including administrator is 16.
User Management
Admin user can control authorization for each function. This authorization is applied the same when the
user connects to the DVR from a remote software.
① Add User
To add a new user, click the [ADD] button. In the setup window that
appears, set new user’s ID, description, password. Also, select which
functions/menu options the user will have access to allow by checking
the box next to the corresponding functions.
In Live & Playback mode, only selected channels are visible to monitor
by the user.
To change any settings, select user and click the [Edit] button.
② Delete User
Select a user in the list by highlighting their name and clicking the [Delete] button.
③ Option
 If Auto Logon “On Boot” is enabled, the DVR will not request an ID or
password after power up.
 If “Auto Logoff” is enabled, the DVR will log off the current user after the set
time of inactivity. Then, the user must login again to operate the DVR.
Example : How to set a user with “Live Monitoring Only”
1) Add a new user name, description and password.
2) Disable all options in [FUNCTION] and [MENU ACCESS].
3) In [LIVE & PLAYBACK], select channel(s) for live monitoring, and click [OK].
4) Click [SAVE].
5) To verify this limited function, log-off through Exit icon and login as the user set above. User can
receive the live images. However, when the user clicks the playback button or selects any other
function, a warning message reading “No Permission for this function” will pop up.


