User Manual

Page | 16
Chapter 3. Using DVR
1. Basic Operation
1-1. Front Panel & IR Remote Controller
This DVR should be installed correctly before using.
Control
Description
USB Port
Two USB ports are located on front panel.
Status LED
Power, HDD, Network, Alarm
1-2. Turning on the System
Once all external devices are properly connected to the DVR, connect the DVR to the power
cable and turn the power on. It may take up to 30 seconds for the system to initialize. Once the
system is initialized, it will display live screen and start to record video automatically.
Note : To turn off the system, select SHUTDOWN in main menu (MENU > SHUTDOWN) and
unplug power cord when shutdown message appears.
Note : It is recommended that you format the DVR’s HDDs when it is installed for first time. To
format the HDD, go to “MENU > RECORD > Storage > HDD format”.
1-3. Menu Bar
Menu bar will appear bottom of screen as follows.
Press ‘Menu’ to open the main menu list.
Shows the status of Digital signage.
Shows the status as import, ready, not Available of
digital signage.
Shows the progress of digital signage.
Show used space as % of HDD being used.
Turned on when the HDD is set to overwrite.
Shows the Sequence display mode.
Turned on when the system is connected to the