User Manual

Page | 84
12.3 Health Check
Use this setup page to enable and setup the Pivot Pro’s advanced remote Health Check
monitoring.
1. Select the frequency you want the software to check your DVR’s status. You can set the
software to:
A. Check the DVR every X number of days, once a day. For example, once every 3
days. The maximum is every 7 days.
B. Check the DVR every X number of hours. For example, once every 12 hours. The
maximum is every 23 hours.
C. Check the DVR every X number of minutes. For example, once every 30 minutes.
The minimum is every 10 minutes.
2. Select which features in the DVR you would like the software to check and the frequency
in which these issues must occur for the software to notify you:
A. Video loss count- If the software detects video loss it will include the information in
the health check report. You can also setup how many times the system detects
video loss before sending you a warning or failure action. For example, if the
system detects 1 video loss every set time, it will notify with a warning as set by
the user. If the system detects video loss more than 5 times in the set time frame,
it will consider this failure, and system will execute action on failure as preset by
the user.
B. Recording failure- If the software detects recording failure it will include the
information ion the health check report. You can also setup how many times the
system detects recording failure before sending a warning or failure action.
C. Disk free space %- You can setup warning and failure action when your HDD is
getting close to its full capacity. For example, the system will send you a warning