User Manual

Page | 95
13.2.2 Sub menu on Device level
Right click on ‘Device’ level on Connection list. It shows menu
as following picture.
- Connect : connect current device
- Disconnect : disconnect current device
- Connect all Cameras: Connect all camera and display
on current division. *if current division is 4, it only
shows ch1~4.
- Disconnect All camera: disconnect all cameras on
current display.
- Show all channels: make another live display pane and
shows all channels of that DVR.
- Search: move to search mode.
- Close Search: close opened search tab.
- Voice warning: only work with PC DVR. Send signal to connected PC DVR.
Selected wave sound out to connected speaker on PC DVR side.
- Device configuration: enter setup configuration of current DVR. Setup display is
different by each DVR.
- Network Backup: Run available Network backup utility. Utility is different by each
DVR.
- Clip Backup: run Clip backup feature on PC DVR.
- View Log files: get connected DVR’s log data. Only work in available model.
- Move to Map: move to registered map.
- Add/Edit Device: move to ‘DVR list setup’.
13.2.3 Sub menu on channel level
Right click on ‘channel’ level on Connection list. It shows
menu as following picture.
- Show Live: display current channel live view.
- Close live: close current channel live view
- Open new Window: Open the channel on popup
window.
- Pause Live: pause current live display.
- Search: move to search mode