Quick Start Guide

Quick Start Guide
9ch w/4 POE 12ch w/8 POE 16ch w/8 POE 16ch w/16 POE
DW-VP92T4P DW-VP123T8P DW-VP163T8P DW-VP163T16P
DW-VP94T4P DW-VP124T8P DW-VP164T8P DW-VP164T16P
DW-VP96T4P DW-VP126T8P DW-VP166T8P DW-VP166T16P
DW-VP129T8P DW-VP169T8P DW-VP169T16P
DW-VP1212T8P DW-VP1612T8P DW-VP1612T16P
Model Total PoE Power Budget Max Power per Port
DW-VP9-4P 90.24Watt 15.4Wat t
DW-VP12-8P
158.4Watt 15.4Wat t
DW-VP16-8P
DW-VP16-16P 200Watt 15.4Wat t
WHAT’S IN THE BOX
CD (QSG + Manual
+ Software) & Quick
Start Guide
1 Set
48V D/C
& Power Cable
1 Set
IR Remote Control 1 Set
Terminal Block
and Rubber Mount
1 Pair
(2 Pieces)
1 Set
USB Mouse 1 Set
Username: admin Password: no password
Attention: This document is intended to serve as a quick reference page for initial set-up.
It is recommended that the user read the entire instruction manual for complete and proper NVR usage.
Tel: [phone]
Technical Support Hours: 9:00AM – 8:00PM EST, Monday thru Friday
digital-watchdog.com
Quick Start Guide
Step 1 – CONNECTING THE NVR Step 2 – POWERING UP THE NVR
SAFETY TIPS
1. Mount and install all necessary cameras and external devices. Refer to their individual manuals for
additional information.
2. Place the NVR in its nal position. See installation tips below.
3. Connect all necessary cables to the NVR
4. Once all additional devices have been properly connected to the NVR, connect the NVR to
an appropriate power supply. The NVR will boot up automatically.
1. When the NVR boots up, it will be in protective mode. This
means you will not be able to access the NVR’s setup menu
until you enter the proper username and password.
2. To unlock the NVR, right-click anywhere on the screen. The
login screen will appear. (Default Username / Password:
admin / no password)
3. When the NVR boots up for the rst time, you will be guided
through the Startup Wizard.
1. Make sure the cameras and the monitors are properly connected to the NVR.
2. The NVR should be placed in a dust and moisture free environment. It must never be directly exposed to
sunlight. Server room temperature is highly recommended to reduce the chance of overheating, which
may cause the NVR to become unstable.
3. During the boot up process, the NVR should not be interrupted by pressing any buttons on the mouse.
Do not unplug the power adapter or turn the NVR off during the boot up process.
4. A UPS (Uninterrupted Power Supply) is highly recommended to prevent damage to the NVR during a
power outage.
DC 48V PoE2
PoE1
PoE4
PoE3
PoE6
PoE5
PoE8
PoE7
AUDIO OUT
TV OUT
eS ATA USB
LAN
PAL
RS485 SENSOR IN
RS485 SENSOR IN
ALARM OUT+
ALARM OUT-
NTSC
TV-OUT VGA
HD OUT VGA OUT
ADAPTER
CAMERA
VGA MONITOR
NETWORK CABLE USB MOUSE PTZ CAMERA ALARM / SENSOR
HD MONITOR
Back Panel Ports may dier according to model