High Resolution Indoor Dome Camera DWC-D1362D ABOUT MANUAL Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for future reference.
PRECAUTIONS Do not open or modify. Do not open the case except during maintenence and installation, for it may be dangerous and can cause damages. Do not put objects into the unit. Keep metal objects and flammable substances from entering the camera. It can cause fire, short-circuits, or other damages. Be careful when handling the unit. To prevent damages, do not drop the camera or subject it to shock or vibration. Do not install near electric or magnetic fields. Protect from humidity and dust.
TABLE OF CONTENTS Introduction Installation Features 4 Parts and Descriptions 5 Dimensions 6 Inside the Box 7 Installation Instructions 8-9 Connecting to Monitors 10 Adjusting the Camera Lens 11 Adjusting the Camera’s Position 12 13 Troubleshooting Warranty Information 14-15 Specifications 16-17 Memo 18-19 3
FEATURES* 1/3” CCD 570 TV Lines (B&W), 540 TV Lines (Color) 3.
PARTS & DESCRIPTION* 1 2 3 4 5 6 7 Lens Power Input Connector (12VDC) Primary Video-BNC Output Connector Bottom Case Mounting Screws Outer Dome Cover Assembly Screws 3 2 4 1 5 6 7 5
DIMENSIONS IN MILLIMETERS (IN)* 7.0(0.28”) 5.0(0.2”) 46.5 (1.83”) 46.5 (1.83”) 85.0(3.35”) 88.0(3.46”) 123.8(4.9”) 6 82.5(3.
INSIDE THE BOX* Included with D1 Indoor Dome Camera 1 2 3 User Manual Mounting Template 2 Machine Screw and 2 Dry Wall Anchors 4 5 6 Miniature TORX Driver L-Key Secondary Video-BNC Cable 7
CAMERA INSTALLATION* 1 Cut a hole in the ceiling for routing the cables. Use your mounting template to mark the screw holes. 2 Drill holes into the drywall and insert the drywall mounts into the holes. 3 Pull wires through and make connections. 4 Mount and secure the camera to the surface using the machine screws. 5 Position the lens, and adjust the zoom and focus. 6 Assemble the outer dome cover with the camera module.
WALL MOUNT INSTALLATION* 1 Check to see all parts are in the box. 2 Use the mount to mark the pilot holes are required. Drill holes into the drywall and insert the drywall mounts. 3 Secure the wall mount to the wall using the mounting screws. 4 Attach the base of the camera to the wall mount with the smaller machine screws. 5 Position the lens, and adjust the zoom and focus. 6 Assemble the outer dome cover with the camera module.
CONNECTING TO MONITORS* DC12V / AC24V Video Output BNC Cable Main Monitor 10
ADJUSTING THE CAMERA LENS* Focus Handle Zoom Handle 1 2 3 4 Loosen the zoom and focus handles by rotating them counter-clockwise. Adjust the field of view by moving the handle to the RIGHT (tele) to zoom in or to the LEFT (wide) to zoom out. AFTER the desired zoom position is established, adjust the focus the same way as described above. Once the desired adjustments have been made, please tighten the handles back by turning them clockwise.
ADJUSTING THE CAMERA’S POSITION* 60.0° Tilt 12 360.
TROUBLESHOOTING Before sending your camera for repair, check the following or contact our technical specialist. FOR NO VIDEO Check the coaxial cable and make sure it is connected securely. Check the lens’ iris adjustment at the camera’s OSD menu. Check the power supply and make sure the camera has the proper voltage and current. FOR OUT-OF-FOCUS VIDEO Check the clear dome cover and the lens for dirt or fingerprints. Use a soft cloth and gently clean. Check the lens’ manual focal and zoom adjustment.
WARRANTY INFORMATION* Digital Watchdog (referred to as “the Warrantor”) warrants the Digital Watchdog Camera against defects in materials or workmanship as follows: LABOR: For the initial five (5) years and one (1) year on IR LED from the original purchase date, if the camera is determined to be defective, the Warrantor will repair or replace the unit with a new or refurbished product at its option at no charge.
LIMITS & EXCLUSIONS* There are no express warranties except as listed. The warrantor will not be liable for incidental or consequential damages (including damage to recording media without limitation) resulting from the use of these products or arising out of any breach of the warranty. All express and implied warranties, including the warranties of merchantability and fitness for particular purpose, are limited to the applicable warranty period set forth above.
SPECIFICATIONS* DWC-D1363D & DWC-D1363D922 VIDEO Image Sensor Total Pixels Effective Pixels Frequency Synchronization Horizontal Resolution Minimum Illumination S/N Ratio Video Output LENS Focal Length Lens Type 1/3" CCD 811 (H) x 508 (V), 411K Pixels 768 (H) x 494 (V) 15.734KHz (H), 59.95Hz (V) Internal or Line Lock 570 TV Lines [B&W], 540 TV Lines [Color] F1.2 (30IRE): 0.01 Lux [Color] F1.2 (30IRE): 0.00 Lux [B&W] 52dB (AGC off) CVBS: 1.0Vp-p / 75 Ω 3.
ENVIRONMENTAL Operating Temperature Operating Humidity Storage Temperature ELECTRICAL Power Requirement Power Consumption 12VDC 12VDC: 1.1, 91.7mA MECHANICAL Housing Material Dome Cover Material Dimensions Weight Plastic Polycarbonate ∅123.8 x 85 mm (∅4.9 X 3.35 in) 0.7 lbs o o o o -10 C ~ 55 C (14 F ~ 131 F) Less than 90% (Non-Condensing) -20oC ~ 70oC (-4oF ~ 158oF) *Specification is subject to change without prior notice.
MEMO* 18
MEMO* 19
5436 W Crenshaw St. Tampa, FL 33634 Tel : 866-446-3595 / 813-888-9555 Fax : 813-888-9262 www.Digital-Watchdog.com technicalsupport@dwcc.